Connector 4 nexus trace connect

Nr. stoc RS: 737-9895Producator: AtmelCod de producator: ATAVR-MICTOR38
brand-logo
Vezi toate produsele din Unelte de dezvoltare cu microcontrolere

Documente tehnice

Specificatii

Marca

Atmel

Clasificare

Development Kit

Detalii produs

Mictor 38 Trace Connector

The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.

Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

Informatii indisponibile despre stoc

P.O.A.

Connector 4 nexus trace connect

1

Disponibil in multiplu de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

Connector 4 nexus trace connect
Informatii indisponibile despre stoc

1

Disponibil in multiplu de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Documente tehnice

Specificatii

Marca

Atmel

Clasificare

Development Kit

Detalii produs

Mictor 38 Trace Connector

The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.

Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.