Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
AssemtechProduct Type
Reed Switch
Configurare contact
SPST-NO
Maximum Switching Current
1A
Maximum Switching Power
40W
Maximum Switching Voltage
200V ac/dc
Contact Resistance
90mΩ
Material de contact
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.35ms
AT Value Range
46 to 70 AT
Tip terminal
Wire
Montare
PCB
Temperatura minima de lucru
-55°C
Latime
2.7 mm
Temperatura maxima de lucru
125°C
Lungime
20.5mm
Standards/Approvals
ISO
Serie
RI
Tara de origine
Belgium
Detalii produs
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Informatii despre stoc temporar indisponibile
€ 5,30
€ 0,53 Buc. (Intr-o punga de 10) (fara TVA)
€ 6,41
€ 0,641 Buc. (Intr-o punga de 10) (cu TVA)
10
€ 5,30
€ 0,53 Buc. (Intr-o punga de 10) (fara TVA)
€ 6,41
€ 0,641 Buc. (Intr-o punga de 10) (cu TVA)
Informatii despre stoc temporar indisponibile
10
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
AssemtechProduct Type
Reed Switch
Configurare contact
SPST-NO
Maximum Switching Current
1A
Maximum Switching Power
40W
Maximum Switching Voltage
200V ac/dc
Contact Resistance
90mΩ
Material de contact
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.35ms
AT Value Range
46 to 70 AT
Tip terminal
Wire
Montare
PCB
Temperatura minima de lucru
-55°C
Latime
2.7 mm
Temperatura maxima de lucru
125°C
Lungime
20.5mm
Standards/Approvals
ISO
Serie
RI
Tara de origine
Belgium
Detalii produs
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
