Assemtech SPST PCB Reed Switch 500 mA 140 V ac/dc
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
AssemtechProduct Type
Reed Switch
Configurare contact
SPST
Maximum Switching Current
500mA
Maximum Switching Power
6W
Maximum Switching Voltage
140V ac/dc
Contact Resistance
150mΩ
Material de contact
Rhodium
Maximum Release Time
0.05ms
Operating Time Including Bounce
0.3ms
AT Value Range
10 to 40 AT
Tip terminal
Wire
Montare
PCB
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Lungime
55mm
Standards/Approvals
ISO
Series
GC
Detalii produs
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Informatii despre stoc temporar indisponibile
€ 1,60
€ 1,60 Buc. (fara TVA)
€ 1,94
€ 1,94 Buc. (cu TVA)
1
€ 1,60
€ 1,60 Buc. (fara TVA)
€ 1,94
€ 1,94 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 14 | € 1,60 |
| 15 - 49 | € 1,41 |
| 50 - 99 | € 1,29 |
| 100 - 499 | € 1,25 |
| 500+ | € 0,92 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
AssemtechProduct Type
Reed Switch
Configurare contact
SPST
Maximum Switching Current
500mA
Maximum Switching Power
6W
Maximum Switching Voltage
140V ac/dc
Contact Resistance
150mΩ
Material de contact
Rhodium
Maximum Release Time
0.05ms
Operating Time Including Bounce
0.3ms
AT Value Range
10 to 40 AT
Tip terminal
Wire
Montare
PCB
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Lungime
55mm
Standards/Approvals
ISO
Series
GC
Detalii produs
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA