Documente tehnice
Specificatii
Marca
Analog DevicesMontare
Surface Mount
Tip pachet
LFCSP WQ
Numar pini
40
Dimensiuni
6.1 x 6.1 x 0.75mm
Lungime
6.1mm
Latime
6.1mm
Inaltime
0.75mm
Maximum Operating Supply Voltage
3.7 V
Temperatura maxima de lucru
+85 °C
Minimum Operating Supply Voltage
2.4 V
Temperatura minima de lucru
-40 °C
Detalii produs
ADE7880, Polyphase Multifunction Energy Metering IC, Analog Devices
The ADE7880 from Analog Devices is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The device incorporates second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition this device has the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory.
Energy/Power Measurement - Analog Devices
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 19,17
Buc. (fara TVA)
€ 22,81
Buc. (cu TVA)
Standard
1
€ 19,17
Buc. (fara TVA)
€ 22,81
Buc. (cu TVA)
Standard
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 9 | € 19,17 |
10 - 24 | € 16,95 |
25 - 49 | € 16,11 |
50 - 99 | € 15,54 |
100+ | € 13,24 |
Documente tehnice
Specificatii
Marca
Analog DevicesMontare
Surface Mount
Tip pachet
LFCSP WQ
Numar pini
40
Dimensiuni
6.1 x 6.1 x 0.75mm
Lungime
6.1mm
Latime
6.1mm
Inaltime
0.75mm
Maximum Operating Supply Voltage
3.7 V
Temperatura maxima de lucru
+85 °C
Minimum Operating Supply Voltage
2.4 V
Temperatura minima de lucru
-40 °C
Detalii produs
ADE7880, Polyphase Multifunction Energy Metering IC, Analog Devices
The ADE7880 from Analog Devices is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The device incorporates second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition this device has the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory.