Amphenol Limited, 905, SMA Multimode Simplex Fibre Optic Connector 128μm Fibre Size, 0.8dB Insertion Loss

Nr. stoc RS: 458-948Producator: Amphenol LimitedCod de producator: 905-405-5007
brand-logo

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Serie

905

Tip conector

SMA

Single/Multimode

Multimode

Simplex/Duplex

Simplex

Fibre Size

128µm

Insertion Loss

0.8dB

Temperatura maxima de lucru

+85°C

Frecventa minima de auto-rezonanta

-40°C

Detalii produs

SMA 905-style Connectors and Accessories

One of the most widely used fibre optic components, this industry-standard connector is suitable for use with both 50/125mm and 62.5/125mm multimode fibres. Use of ceramic ferrules results in much enhanced performance with lower insertion losses and rotational sensitivity. Two options are offered for use with either 2.5mm or 3.0mm outside diameter tight buffered cable. An in-line adaptor for coupling two cables together is also available. All the essential termination tooling is available in this section and the simple termination procedure is outlined in an data sheet.

€ 22,73

€ 22,73 Buc. (fara TVA)

€ 27,50

€ 27,50 Buc. (cu TVA)

Amphenol Limited, 905, SMA Multimode Simplex Fibre Optic Connector 128μm Fibre Size, 0.8dB Insertion Loss

€ 22,73

€ 22,73 Buc. (fara TVA)

€ 27,50

€ 27,50 Buc. (cu TVA)

Amphenol Limited, 905, SMA Multimode Simplex Fibre Optic Connector 128μm Fibre Size, 0.8dB Insertion Loss

Informatii despre stoc temporar indisponibile

Informatii despre stoc temporar indisponibile

CantitatePret unitar
1 - 9€ 22,73
10 - 49€ 21,16
50+€ 19,84

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Serie

905

Tip conector

SMA

Single/Multimode

Multimode

Simplex/Duplex

Simplex

Fibre Size

128µm

Insertion Loss

0.8dB

Temperatura maxima de lucru

+85°C

Frecventa minima de auto-rezonanta

-40°C

Detalii produs

SMA 905-style Connectors and Accessories

One of the most widely used fibre optic components, this industry-standard connector is suitable for use with both 50/125mm and 62.5/125mm multimode fibres. Use of ceramic ferrules results in much enhanced performance with lower insertion losses and rotational sensitivity. Two options are offered for use with either 2.5mm or 3.0mm outside diameter tight buffered cable. An in-line adaptor for coupling two cables together is also available. All the essential termination tooling is available in this section and the simple termination procedure is outlined in an data sheet.