Documente tehnice
Specificatii
Marca
Allegro MicrosystemsTip senzor
Hall Effect Sensors
Montare
Through Hole
Magnetic Type
Unipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Tip pachet
SIP
Inaltime
3.02mm
Dimensiuni
4.09 x 1.52 x 3.02mm
Frecventa minima de auto-rezonanta
-40 °C
Numar pini
3
Temperatura maxima de lucru
+85 °C
Typical Magnetic Sensor Hysteresis
10 Gs
Detalii produs
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 1,12
Buc. (Livrat pe rola) (fara TVA)
€ 1,333
Buc. (Livrat pe rola) (cu TVA)
5
€ 1,12
Buc. (Livrat pe rola) (fara TVA)
€ 1,333
Buc. (Livrat pe rola) (cu TVA)
5
Cumpara in pachete mari
Cantitate | Pret unitar | Per Rola |
---|---|---|
5 - 20 | € 1,12 | € 5,60 |
25 - 95 | € 0,90 | € 4,50 |
100 - 245 | € 0,74 | € 3,70 |
250 - 495 | € 0,69 | € 3,45 |
500+ | € 0,65 | € 3,25 |
Documente tehnice
Specificatii
Marca
Allegro MicrosystemsTip senzor
Hall Effect Sensors
Montare
Through Hole
Magnetic Type
Unipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Tip pachet
SIP
Inaltime
3.02mm
Dimensiuni
4.09 x 1.52 x 3.02mm
Frecventa minima de auto-rezonanta
-40 °C
Numar pini
3
Temperatura maxima de lucru
+85 °C
Typical Magnetic Sensor Hysteresis
10 Gs
Detalii produs
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.