Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Aim-TTiProduct Type
Bench Power Supply
Maximum Output Current
20A
Maximum Output Voltage
120V
Numar iesiri
3
Power
378W
Tensiune de alimentare minima
110V ac
Tip priza
IEC 320
Tensiune de alimentare maxima
240V ac
Tip iesire
Digital
Digital/Analogue
Digital
Temperatura minima de lucru
5°C
Supported Number of Displays
3
Temperatura maxima de lucru
40°C
Standards/Approvals
RoHS
Minimum Output Voltage
15V
Minimum Output Current
3A
Tara de origine
United Kingdom
Detalii produs
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.
Informatii despre stoc temporar indisponibile
€ 1.322,24
€ 1.322,24 Buc. (fara TVA)
€ 1.599,91
€ 1.599,91 Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
€ 1.322,24
€ 1.322,24 Buc. (fara TVA)
€ 1.599,91
€ 1.599,91 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Tip calibrare
Fara calibrare
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Aim-TTiProduct Type
Bench Power Supply
Maximum Output Current
20A
Maximum Output Voltage
120V
Numar iesiri
3
Power
378W
Tensiune de alimentare minima
110V ac
Tip priza
IEC 320
Tensiune de alimentare maxima
240V ac
Tip iesire
Digital
Digital/Analogue
Digital
Temperatura minima de lucru
5°C
Supported Number of Displays
3
Temperatura maxima de lucru
40°C
Standards/Approvals
RoHS
Minimum Output Voltage
15V
Minimum Output Current
3A
Tara de origine
United Kingdom
Detalii produs
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.
