Documente tehnice
Specificatii
Marca
Advance TapesTotal Thickness
0.06mm
Tape Type
Copper Tape
Foil Thickness
0.035mm
Latime
12mm
Lungime
33m
Conductivity
Conductive
Adhesion Strength
5 N/cm
Adhesive Material
Acrylic
Material
Tin
Rezistenta la tractiune
40N/cm
Maximum Temperature Resistance
+155°C
Temperatura minima
-20°C
Complies with EN Legislation
BS EN 60454 - Part 2
Model
AT544
Tara de origine
Ireland
Detalii produs
AT544 35μ Tin Clad Copper Foil Masking Tape
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder coating or spray painting.The masking tape is then removed to expose a clean and electrically contactable tin layer. This tin layer can then form a complete EMI shield contact with a suitable foam rubber door seal
Approvals
Conforms to Flame Retardant requirement part only of UL510
Standards
Tested in accordnace with ASTM D-1000 latest issue, BS EN 60454/ Part 2 (1996)-formerly VDE 0340, B.S
EMI/RFI Shielding Tapes
When using these tapes galvanic compatibility should be taken into account.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 229,29
1 Reel of 33 Metres (fara TVA)
€ 272,86
1 Reel of 33 Metres (cu TVA)
1
€ 229,29
1 Reel of 33 Metres (fara TVA)
€ 272,86
1 Reel of 33 Metres (cu TVA)
1
Documente tehnice
Specificatii
Marca
Advance TapesTotal Thickness
0.06mm
Tape Type
Copper Tape
Foil Thickness
0.035mm
Latime
12mm
Lungime
33m
Conductivity
Conductive
Adhesion Strength
5 N/cm
Adhesive Material
Acrylic
Material
Tin
Rezistenta la tractiune
40N/cm
Maximum Temperature Resistance
+155°C
Temperatura minima
-20°C
Complies with EN Legislation
BS EN 60454 - Part 2
Model
AT544
Tara de origine
Ireland
Detalii produs
AT544 35μ Tin Clad Copper Foil Masking Tape
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder coating or spray painting.The masking tape is then removed to expose a clean and electrically contactable tin layer. This tin layer can then form a complete EMI shield contact with a suitable foam rubber door seal
Approvals
Conforms to Flame Retardant requirement part only of UL510
Standards
Tested in accordnace with ASTM D-1000 latest issue, BS EN 60454/ Part 2 (1996)-formerly VDE 0340, B.S
EMI/RFI Shielding Tapes
When using these tapes galvanic compatibility should be taken into account.