Adafruit 684, mini color OLED 0.96in OLED Display Breakout Board With microSD holder
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESDiagonala display
0.96in
Tehnologie display
OLED Display
Clasificare
Breakout Board
Kit Name
mini color OLED
Featured Device
microSD holder
Tehnologie
OLED
Detalii produs
Adafruit 0.96 inch OLED Screen Breakout Board with microSD Card Holder
A tiny screen yet delivers huge contrast and brightness and is perfect for displaying text or graphics. OLED screens do not need a backlight helping them to be energy efficient. Current draw depends on usage as each OLED LED draws current only when on. The more pixels which are lit, the more current is used.
The screen measure 0.96 inch and has 96 x 64 pixels.
This board uses the SSD1331 driver chip, which manages the display and you interface with it using SPI (clock, data, chip select, data/command and an optional reset pin).
The board and screen are supplied as a fully assembled breakout which includes a small boost converter (required for providing 12 V to the OLED) and a micro-SD card holder. It also has built-in logic level shifting so you can use it with 3 V to 5 V dc power and logic levels.
Passive Matrix OLED Displays
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 36,64
Buc. (fara TVA)
€ 43,60
Buc. (cu TVA)
1
€ 36,64
Buc. (fara TVA)
€ 43,60
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 36,64 |
| 5 - 9 | € 31,81 |
| 10+ | € 28,47 |
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESDiagonala display
0.96in
Tehnologie display
OLED Display
Clasificare
Breakout Board
Kit Name
mini color OLED
Featured Device
microSD holder
Tehnologie
OLED
Detalii produs
Adafruit 0.96 inch OLED Screen Breakout Board with microSD Card Holder
A tiny screen yet delivers huge contrast and brightness and is perfect for displaying text or graphics. OLED screens do not need a backlight helping them to be energy efficient. Current draw depends on usage as each OLED LED draws current only when on. The more pixels which are lit, the more current is used.
The screen measure 0.96 inch and has 96 x 64 pixels.
This board uses the SSD1331 driver chip, which manages the display and you interface with it using SPI (clock, data, chip select, data/command and an optional reset pin).
The board and screen are supplied as a fully assembled breakout which includes a small boost converter (required for providing 12 V to the OLED) and a micro-SD card holder. It also has built-in logic level shifting so you can use it with 3 V to 5 V dc power and logic levels.