ADAFRUIT INDUSTRIES Controller Board Motor Controller for DRV2605L for Haptic Motor
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ADAFRUIT INDUSTRIESProduct Type
Evaluation Board
Power Management Function
Motor Controller
Utilizare cu
Haptic Motor
Clasificare
Development Board
Featured Device
DRV2605L
Kit Name
Controller Board
Standards/Approvals
No
Distrelec Product Id
30091178
Detalii produs
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
Motor Controllers & Drivers
Informatii despre stoc temporar indisponibile
€ 7,87
€ 7,87 Buc. (fara TVA)
€ 9,52
€ 9,52 Buc. (cu TVA)
1
€ 7,87
€ 7,87 Buc. (fara TVA)
€ 9,52
€ 9,52 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ADAFRUIT INDUSTRIESProduct Type
Evaluation Board
Power Management Function
Motor Controller
Utilizare cu
Haptic Motor
Clasificare
Development Board
Featured Device
DRV2605L
Kit Name
Controller Board
Standards/Approvals
No
Distrelec Product Id
30091178
Detalii produs
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.