Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESClasificare
Development Board
Kit Name
GEMMA V2
Tehnologie
Wearable
Numar procesor
ATtiny85
Processor Type
MCU
Detalii produs
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.
Adafruit GEMMA Wearable Platform
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 11,93
Buc. (fara TVA)
€ 14,20
Buc. (cu TVA)
1
€ 11,93
Buc. (fara TVA)
€ 14,20
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 4 | € 11,93 |
5 - 9 | € 10,04 |
10+ | € 8,68 |
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESClasificare
Development Board
Kit Name
GEMMA V2
Tehnologie
Wearable
Numar procesor
ATtiny85
Processor Type
MCU
Detalii produs
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.