ABB 2TLA Series Twist Release Emergency Stop Push Button, Surface Mount, 1NC, IP65
Documente tehnice
Specificatii
Marca
ABBMontare
Surface Mount
Configurare contact
1NC
Push Button Actuation
Twist Release
Iluminat
No
Dimensiune celula
2TLA
Protectie IP
IP65
Culoare
Red
Push Button Shape
Round
Tensiune nominala
24V dc
Adancime
52mm
Auxiliary Contacts
NO
Inaltime
84mm
Culoare carcasa
Yellow
Push Button Material
Plastic
Bezel Material
Plastic
Detalii produs
Smile Tina E-Stop for Vital/Pluto
Smile Tina from ABB is very easy to install, especially on aluminium extrusions. There are three different versions available, either with one or two M12 connections or cable. Two M12 connectors are used to enable the connection of E-stops in series, which is often used with dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED indicates the actual status according to the dynamic system. Smile Tina from ABB is intended for use in safety circuits in accordance with EN 60204-1.
Approvals
CE, TUV
Standards
EN ISO 12100-1, EN ISO 12100-2, EN 60204-1, EN 954-1, EN ISO 13849-1, EN 62061, IEC 60947-5-1
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 137,87
Buc. (fara TVA)
€ 164,07
Buc. (cu TVA)
1
€ 137,87
Buc. (fara TVA)
€ 164,07
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 137,87 |
| 5 - 9 | € 126,61 |
| 10 - 24 | € 119,19 |
| 25 - 49 | € 111,82 |
| 50+ | € 104,63 |
Documente tehnice
Specificatii
Marca
ABBMontare
Surface Mount
Configurare contact
1NC
Push Button Actuation
Twist Release
Iluminat
No
Dimensiune celula
2TLA
Protectie IP
IP65
Culoare
Red
Push Button Shape
Round
Tensiune nominala
24V dc
Adancime
52mm
Auxiliary Contacts
NO
Inaltime
84mm
Culoare carcasa
Yellow
Push Button Material
Plastic
Bezel Material
Plastic
Detalii produs
Smile Tina E-Stop for Vital/Pluto
Smile Tina from ABB is very easy to install, especially on aluminium extrusions. There are three different versions available, either with one or two M12 connections or cable. Two M12 connectors are used to enable the connection of E-stops in series, which is often used with dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED indicates the actual status according to the dynamic system. Smile Tina from ABB is intended for use in safety circuits in accordance with EN 60204-1.
Approvals
CE, TUV
Standards
EN ISO 12100-1, EN ISO 12100-2, EN 60204-1, EN 954-1, EN ISO 13849-1, EN 62061, IEC 60947-5-1