ABB Modular DIN Rail Components EPD24 Electronic Circuit Breaker 10 A 24 V, 1 channels, DIN Rail current limitation 1.8
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ABBProduct Type
Electronic Circuit Breaker
Raza actiune
Modular DIN Rail Components
Serie
EPD24
Number of Channels
1
Curent nominal
10 A
Tensiune
24 V
Montare
DIN Rail
Tripping Characteristics
current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A)
Lungime
83mm
Tip terminal
Screw
Latime
12.5 mm
Adancime
83mm
Standards/Approvals
RoHS, UL, CSA
Tara de origine
Germany
Detalii produs
EPD24 Series Electronic Protection Device
ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.
Informatii despre stoc temporar indisponibile
€ 137,46
€ 137,46 Buc. (fara TVA)
€ 166,33
€ 166,33 Buc. (cu TVA)
1
€ 137,46
€ 137,46 Buc. (fara TVA)
€ 166,33
€ 166,33 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ABBProduct Type
Electronic Circuit Breaker
Raza actiune
Modular DIN Rail Components
Serie
EPD24
Number of Channels
1
Curent nominal
10 A
Tensiune
24 V
Montare
DIN Rail
Tripping Characteristics
current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A)
Lungime
83mm
Tip terminal
Screw
Latime
12.5 mm
Adancime
83mm
Standards/Approvals
RoHS, UL, CSA
Tara de origine
Germany
Detalii produs
EPD24 Series Electronic Protection Device
ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.