4D Systems, 0.96in Arduino Compatible Display with OLED Display
Documente tehnice
Specificatii
Marca
4D SystemsDiagonala display
0.96in
Tehnologie display
OLED Display
Rezolutie display
96 x 64pixel
Dimensiune zona vizuala
20.1 x 13.4mm
Dimensiuni
32.7 x 26.7 x 13.2mm
Utilizare cu
Arduino
Tara de origine
Philippines
Detalii produs
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems Passive Matrix OLED Displays
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 65,69
Buc. (Intr-o cutie de 25) (fara TVA)
€ 78,171
Buc. (Intr-o cutie de 25) (cu TVA)
25
€ 65,69
Buc. (Intr-o cutie de 25) (fara TVA)
€ 78,171
Buc. (Intr-o cutie de 25) (cu TVA)
25
Documente tehnice
Specificatii
Marca
4D SystemsDiagonala display
0.96in
Tehnologie display
OLED Display
Rezolutie display
96 x 64pixel
Dimensiune zona vizuala
20.1 x 13.4mm
Dimensiuni
32.7 x 26.7 x 13.2mm
Utilizare cu
Arduino
Tara de origine
Philippines
Detalii produs
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.