Documente tehnice
Specificatii
Marca
4D SystemsDiagonala display
7in
Tehnologie display
Resistive Touch Screen
Rezolutie display
800 x 480pixel
Dimensiune zona vizuala
154.1 x 85.9mm
Dimensiuni
179.9 x 100 x 15.5mm
Utilizare cu
Arduino
Serie
gen4
Tara de origine
Philippines
Detalii produs
4D Systems Resistive Touch LCD Modules with DIABLO16 Processor for Use with Arduino
The range of resistive touch LCD modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module DIABLO16 processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The resistive touch LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems LCD Touchscreens
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 227,77
Buc. (fara TVA)
€ 271,05
Buc. (cu TVA)
1
€ 227,77
Buc. (fara TVA)
€ 271,05
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
4D SystemsDiagonala display
7in
Tehnologie display
Resistive Touch Screen
Rezolutie display
800 x 480pixel
Dimensiune zona vizuala
154.1 x 85.9mm
Dimensiuni
179.9 x 100 x 15.5mm
Utilizare cu
Arduino
Serie
gen4
Tara de origine
Philippines
Detalii produs
4D Systems Resistive Touch LCD Modules with DIABLO16 Processor for Use with Arduino
The range of resistive touch LCD modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module DIABLO16 processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The resistive touch LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.