Wago 750 Series PLC CPU for Use with 750 Series
Documente tehnice
Specificatii
Marca
WagoProducator
750
Utilizare cu
750 Series
Network Type
Ethernet
Interfata
Ethernet
Programming Interface
Ethernet
Frecventa minima de auto-rezonanta
0°C
Montare
DIN Rail
Programming Language Used
CFC, FBD, Ladder Logic, SFC
Temperatura maxima de lucru
+55°C
Dimensiuni
71.9 x 61.5 x 100 mm
Standarde
UL
Communication Port Type
RJ-45
Adancime
71.9mm
Lungime
100mm
Latime
61.5mm
Memory
1024 kB
Tara de origine
Germany
Detalii produs
ETHERNET Media Redundancy Programmable Fieldbus Controller
PLC - ETHERNET Media Redundancy Programmable Fieldbus Controller connects ETHERNET to the modular WAGO-I/O-System, and is used in ETHERNET networks requiring fast and safe media redundancy.
Media redundancy is achieved by operating the controller in two separate networks, in which it is accessible via two different IP addresses (including two MAC IDs). Cross communication between separate channels is not possible. The two separate ETHERNET interfaces allow redundant connection of two transmission paths (no hub or switch required).
Wago I/O system range
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 805,37
Buc. (fara TVA)
€ 958,39
Buc. (cu TVA)
1
€ 805,37
Buc. (fara TVA)
€ 958,39
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
WagoProducator
750
Utilizare cu
750 Series
Network Type
Ethernet
Interfata
Ethernet
Programming Interface
Ethernet
Frecventa minima de auto-rezonanta
0°C
Montare
DIN Rail
Programming Language Used
CFC, FBD, Ladder Logic, SFC
Temperatura maxima de lucru
+55°C
Dimensiuni
71.9 x 61.5 x 100 mm
Standarde
UL
Communication Port Type
RJ-45
Adancime
71.9mm
Lungime
100mm
Latime
61.5mm
Memory
1024 kB
Tara de origine
Germany
Detalii produs
ETHERNET Media Redundancy Programmable Fieldbus Controller
PLC - ETHERNET Media Redundancy Programmable Fieldbus Controller connects ETHERNET to the modular WAGO-I/O-System, and is used in ETHERNET networks requiring fast and safe media redundancy.
Media redundancy is achieved by operating the controller in two separate networks, in which it is accessible via two different IP addresses (including two MAC IDs). Cross communication between separate channels is not possible. The two separate ETHERNET interfaces allow redundant connection of two transmission paths (no hub or switch required).