Time Electronics 7007, 20mA Loop Calibrator - RS Calibration
Documente tehnice
Specificatii
Marca
Time ElectronicsAbsolute Maximum Current Measurement
20mA
Calibrat
RSCAL
Best Accuracy
±0.05 %
Battery Type
9V
Battery Life
40 h
Power Source
Battery
Greutate
200g
Inaltime
140mm
Lungime
30mm
Temperatura maxima de lucru
+50°C
Temperatura minima de lucru
0°C
Latime
65mm
Model
7007
Tara de origine
United Kingdom
Detalii produs
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 406,00
Buc. (fara TVA)
€ 483,14
Buc. (cu TVA)
Tip calibrare
Calibrare RS
1
€ 406,00
Buc. (fara TVA)
€ 483,14
Buc. (cu TVA)
Tip calibrare
Calibrare RS
1
Documente tehnice
Specificatii
Marca
Time ElectronicsAbsolute Maximum Current Measurement
20mA
Calibrat
RSCAL
Best Accuracy
±0.05 %
Battery Type
9V
Battery Life
40 h
Power Source
Battery
Greutate
200g
Inaltime
140mm
Lungime
30mm
Temperatura maxima de lucru
+50°C
Temperatura minima de lucru
0°C
Latime
65mm
Model
7007
Tara de origine
United Kingdom
Detalii produs
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual