TE Connectivity Transparent Polyolefin Solder Sleeve 35.5mm Length 4 → 11.5mm Cable Diameter
Documente tehnice
Specificatii
Marca
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+125°C
Cantitate
2
Culoare
Transparent
Shrink Temperature
+85°C
Serie
B-155
Standarde
ANSI J-STD-004, ANSI J-STD-006
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 2,73
Buc. (Intr-un pachet de 25) (fara TVA)
€ 3,249
Buc. (Intr-un pachet de 25) (cu TVA)
25
€ 2,73
Buc. (Intr-un pachet de 25) (fara TVA)
€ 3,249
Buc. (Intr-un pachet de 25) (cu TVA)
25
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 25 - 350 | € 2,73 | € 68,25 |
| 375 - 1225 | € 2,50 | € 62,50 |
| 1250+ | € 2,34 | € 58,50 |
Documente tehnice
Specificatii
Marca
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+125°C
Cantitate
2
Culoare
Transparent
Shrink Temperature
+85°C
Serie
B-155
Standarde
ANSI J-STD-004, ANSI J-STD-006
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.