Documente tehnice
Specificatii
Marca
TE ConnectivityTip produs
Receptacle
Minimum Wire Size mm²
0.3mm²
Subtip
Female
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.81mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Terminal
Crimp
Culoare
Red
Material de contact
Brass
Placa contact
Tin
Insulation Material
Heat-shrinkable Nylon
Dimensiune celula
Duraseal
Tara de origine
Mexico
Detalii produs
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 937,08
1 Box of 1000 (fara TVA)
€ 1.115,13
1 Box of 1000 (cu TVA)
1
€ 937,08
1 Box of 1000 (fara TVA)
€ 1.115,13
1 Box of 1000 (cu TVA)
1
Documente tehnice
Specificatii
Marca
TE ConnectivityTip produs
Receptacle
Minimum Wire Size mm²
0.3mm²
Subtip
Female
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.81mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Terminal
Crimp
Culoare
Red
Material de contact
Brass
Placa contact
Tin
Insulation Material
Heat-shrinkable Nylon
Dimensiune celula
Duraseal
Tara de origine
Mexico
Detalii produs
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed