RS PRO 5A F Glass Cartridge Fuse, 5 x 20mm
Documente tehnice
Specificatii
Viteza siguranta
F
Tip material
Glass
Curent nominal
5A
Tensiune nominala
250V ac
Dimensiune siguranta
5 x 20mm
Marca
RS ProTara de origine
Taiwan, Province Of China
Detalii produs
Blind Housing Bearing Puller Kit
The SKF TMMD 100 is especially designed to allow easy and quick dismounting of deep groove ball bearings with interference fit on both rings. The puller is suitable for use in both blind housings and shaft applications. In addition to dismounting open bearings, the TMMD 100 can be used to dismount sealed bearings after the removal of the seal. The puller kit contains six sets of different size puller arms, two spindles and one handle packed in a carrying case. The TMMD 100 is suitable for dismounting up to 71 different SKF deep groove ball bearings from shaft diameter ranging between 10 mm and 100 mm.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,35
Buc. (Intr-un pachet de 10) (fara TVA)
€ 0,416
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 0,35
Buc. (Intr-un pachet de 10) (fara TVA)
€ 0,416
Buc. (Intr-un pachet de 10) (cu TVA)
10
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 90 | € 0,35 | € 3,50 |
100 - 190 | € 0,32 | € 3,20 |
200 - 490 | € 0,29 | € 2,90 |
500+ | € 0,28 | € 2,80 |
Documente tehnice
Specificatii
Viteza siguranta
F
Tip material
Glass
Curent nominal
5A
Tensiune nominala
250V ac
Dimensiune siguranta
5 x 20mm
Marca
RS ProTara de origine
Taiwan, Province Of China
Detalii produs
Blind Housing Bearing Puller Kit
The SKF TMMD 100 is especially designed to allow easy and quick dismounting of deep groove ball bearings with interference fit on both rings. The puller is suitable for use in both blind housings and shaft applications. In addition to dismounting open bearings, the TMMD 100 can be used to dismount sealed bearings after the removal of the seal. The puller kit contains six sets of different size puller arms, two spindles and one handle packed in a carrying case. The TMMD 100 is suitable for dismounting up to 71 different SKF deep groove ball bearings from shaft diameter ranging between 10 mm and 100 mm.