Parker Hydraulic End Sleeve TXS16

Nr. stoc RS: 302-8219Producator: ParkerCod de producator: TXS16
brand-logo
Vezi toate produsele din Accesorii de montaj hidraulic

Documente tehnice

Specificatii

Marca

Parker

Material

Steel

Detalii produs

End Sleeve

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

Informatii indisponibile despre stoc

P.O.A.

Parker Hydraulic End Sleeve TXS16

10

Disponibil in multiplu de 10
10P.O.A.
20P.O.A.
30P.O.A.
40P.O.A.
50P.O.A.
60P.O.A.
70P.O.A.
80P.O.A.
90P.O.A.
100P.O.A.
110P.O.A.
120P.O.A.
130P.O.A.
140P.O.A.
150P.O.A.

P.O.A.

Parker Hydraulic End Sleeve TXS16
Informatii indisponibile despre stoc

10

Disponibil in multiplu de 10
10P.O.A.
20P.O.A.
30P.O.A.
40P.O.A.
50P.O.A.
60P.O.A.
70P.O.A.
80P.O.A.
90P.O.A.
100P.O.A.
110P.O.A.
120P.O.A.
130P.O.A.
140P.O.A.
150P.O.A.

Documente tehnice

Specificatii

Marca

Parker

Material

Steel

Detalii produs

End Sleeve

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.