Nuvotem Talema 115 V ac, 230 V ac, 2 x 25V ac Toroidal Transformer, 80VA 2 Output
Documente tehnice
Specificatii
Marca
Nuvotem TalemaPrimary Voltage Rating
115 V ac, 230 V ac
Secondary Voltage Rating
2 x 25V ac
Putere
80VA
Numar iesiri
2
Secondary Current
1.6A
Inaltime
38mm
Greutate
900g
Diametru
93mm
Dimensiuni
93 (Dia.) x 38mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Terminal
Leads
Maximum Temperature
+40°C
Detalii produs
Open Style with Leads, 115/230Vac Primary 15VA to 1000VA
High quality open style toroidal transformers with twin 115Vac 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Approvals
UL506, EN61558
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 60,86
Buc. (fara TVA)
€ 72,42
Buc. (cu TVA)
1
€ 60,86
Buc. (fara TVA)
€ 72,42
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 60,86 |
| 10 - 24 | € 55,37 |
| 25 - 49 | € 49,04 |
| 50 - 74 | € 42,83 |
| 75+ | € 36,70 |
Documente tehnice
Specificatii
Marca
Nuvotem TalemaPrimary Voltage Rating
115 V ac, 230 V ac
Secondary Voltage Rating
2 x 25V ac
Putere
80VA
Numar iesiri
2
Secondary Current
1.6A
Inaltime
38mm
Greutate
900g
Diametru
93mm
Dimensiuni
93 (Dia.) x 38mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Terminal
Leads
Maximum Temperature
+40°C
Detalii produs
Open Style with Leads, 115/230Vac Primary 15VA to 1000VA
High quality open style toroidal transformers with twin 115Vac 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Approvals
UL506, EN61558