Documente tehnice
Specificatii
Marca
MolexSerie
MICRO-LATCH
Pitch
2.0mm
Numar contacte
3
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Montare
Through Hole
Terminal
Solder
Placa contact
Tin
Material de contact
Brass
Curent nominal
2.0A
Dimensiune celula
53254
Tensiune
125.0 V
Tara de origine
Malaysia
Detalii produs
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 2,00
€ 0,20 Buc. (Intr-un pachet de 10) (fara TVA)
€ 2,38
€ 0,238 Buc. (Intr-un pachet de 10) (cu TVA)
Standard
10
€ 2,00
€ 0,20 Buc. (Intr-un pachet de 10) (fara TVA)
€ 2,38
€ 0,238 Buc. (Intr-un pachet de 10) (cu TVA)
Standard
10
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 190 | € 0,20 | € 2,00 |
200 - 740 | € 0,15 | € 1,50 |
750 - 2990 | € 0,13 | € 1,30 |
3000 - 5990 | € 0,11 | € 1,10 |
6000+ | € 0,11 | € 1,10 |
Documente tehnice
Specificatii
Marca
MolexSerie
MICRO-LATCH
Pitch
2.0mm
Numar contacte
3
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Montare
Through Hole
Terminal
Solder
Placa contact
Tin
Material de contact
Brass
Curent nominal
2.0A
Dimensiune celula
53254
Tensiune
125.0 V
Tara de origine
Malaysia
Detalii produs
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.