Documente tehnice
Specificatii
Marca
MolexNumar contacte
9
Material de contact
Phosphor Bronze
Pitch
1mm
Montare
Surface Mount
Subtip
Male
Terminal
ZIF Bottom Contact
Body Orientation
Right Angle
Curent nominal
500mA
Tensiune nominala
50 V ac/dc
Dimensiune celula
Easy-On
Dimensiune celula
200528
Number Of Rows
1
Placa contact
Gold over Nickel
Terminal
Solder
Temperatura maxima de lucru
+105°C
Housing Material
Liquid Crystal Polymer
Frecventa minima de auto-rezonanta
-40°C
Tara de origine
Japan
Detalii produs
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.
1.0mm FFC/FPC Connectors – Molex
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,32
Buc. (Pe o rola de 3000) (fara TVA)
€ 0,381
Buc. (Pe o rola de 3000) (cu TVA)
3000
€ 0,32
Buc. (Pe o rola de 3000) (fara TVA)
€ 0,381
Buc. (Pe o rola de 3000) (cu TVA)
3000
Documente tehnice
Specificatii
Marca
MolexNumar contacte
9
Material de contact
Phosphor Bronze
Pitch
1mm
Montare
Surface Mount
Subtip
Male
Terminal
ZIF Bottom Contact
Body Orientation
Right Angle
Curent nominal
500mA
Tensiune nominala
50 V ac/dc
Dimensiune celula
Easy-On
Dimensiune celula
200528
Number Of Rows
1
Placa contact
Gold over Nickel
Terminal
Solder
Temperatura maxima de lucru
+105°C
Housing Material
Liquid Crystal Polymer
Frecventa minima de auto-rezonanta
-40°C
Tara de origine
Japan
Detalii produs
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.