Documente tehnice
Specificatii
Marca
MicrochipMaximum Switching Frequency
1.6 MHz
Tensiune iesire
0.5 → 3.6 V
Curent iesire
30 mA
Control Method
Voltage
Montare
Surface Mount
Fall Time
30ns
Tip pachet
QFN
Rise Time
30ns
Numar pini
24
Topology
Buck
Maximum Duty Cycle
<50%
Dimensiuni
4 x 4 x 0.85mm
Lungime
4mm
Latime
4mm
Inaltime
0.85mm
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+125 °C
Detalii produs
MCP19118/19119 PWM Controllers with 8-Bit PIC MCU
MCP19118/19119 devices from Microchip are highly integrated, mixed signal, analogue pulse-width modulation (PWM) current mode controllers with an integrated PIC® microcontroller core for synchronous DC/DC step-down applications.
The integrated PIC® microcontroller mid-range core allows complete customisation of the device operating parameters, start-up and shutdown profiles, protection levels and fault handling procedures. After initial configuration using Microchips MPLAB® X Integrated Development Environment (IDE) software, the PMBus or I2C can be used by a host PC to communicate with or modify the operation of the device.
PWM (Pulse Width Modulation) Controllers, Microchip
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
2
P.O.A.
2
Documente tehnice
Specificatii
Marca
MicrochipMaximum Switching Frequency
1.6 MHz
Tensiune iesire
0.5 → 3.6 V
Curent iesire
30 mA
Control Method
Voltage
Montare
Surface Mount
Fall Time
30ns
Tip pachet
QFN
Rise Time
30ns
Numar pini
24
Topology
Buck
Maximum Duty Cycle
<50%
Dimensiuni
4 x 4 x 0.85mm
Lungime
4mm
Latime
4mm
Inaltime
0.85mm
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+125 °C
Detalii produs
MCP19118/19119 PWM Controllers with 8-Bit PIC MCU
MCP19118/19119 devices from Microchip are highly integrated, mixed signal, analogue pulse-width modulation (PWM) current mode controllers with an integrated PIC® microcontroller core for synchronous DC/DC step-down applications.
The integrated PIC® microcontroller mid-range core allows complete customisation of the device operating parameters, start-up and shutdown profiles, protection levels and fault handling procedures. After initial configuration using Microchips MPLAB® X Integrated Development Environment (IDE) software, the PMBus or I2C can be used by a host PC to communicate with or modify the operation of the device.