Documente tehnice
Specificatii
Marca
LittelfuseFuse Holder Type
Panel Mount
Dimensiune siguranta
6.3 x 32mm
Inaltime
33.8mm
Cover Material
Polyamide
International Protection Rating
IP40
Dimensiuni
9.2 x 33.8mm
Utilizare cu
6.3 x 32 mm Fuse
Detalii produs
Littelfuse Fuseholders and Clips - 6.3x32mm
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 2,93
Buc. (Intr-un pachet de 5) (fara TVA)
€ 3,487
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 2,93
Buc. (Intr-un pachet de 5) (fara TVA)
€ 3,487
Buc. (Intr-un pachet de 5) (cu TVA)
5
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
5 - 20 | € 2,93 | € 14,65 |
25 - 45 | € 2,68 | € 13,40 |
50 - 120 | € 2,53 | € 12,65 |
125 - 245 | € 2,37 | € 11,85 |
250+ | € 2,22 | € 11,10 |
Documente tehnice
Specificatii
Marca
LittelfuseFuse Holder Type
Panel Mount
Dimensiune siguranta
6.3 x 32mm
Inaltime
33.8mm
Cover Material
Polyamide
International Protection Rating
IP40
Dimensiuni
9.2 x 33.8mm
Utilizare cu
6.3 x 32 mm Fuse
Detalii produs
Littelfuse Fuseholders and Clips - 6.3x32mm
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.