Legris Nickel Plated Brass 2 Way, Ball Valve, BSPP 1/2in, 40bar Operating Pressure
Documente tehnice
Specificatii
Marca
LegrisTip produs
2 Way
Ball Material
Polished Brass
Tip atasament
Threaded
Filet standard
BSPP
Dimensiune filet
1/2in
Tip material
Nickel Plated Brass
Safe for Use With
Water
Maner
Lever
Presiune maxima de lucru
580psi
Operating Pressure
40bar
Maner
Red
Presiune maxima de lucru
40bar
Tara de origine
France
Detalii produs
In-Line Double Female Vented Lockable Ball Valve
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple 180° turn for the three way version
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 244,43
1 Box of 2 (fara TVA)
€ 290,87
1 Box of 2 (cu TVA)
1
€ 244,43
1 Box of 2 (fara TVA)
€ 290,87
1 Box of 2 (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 244,43 |
| 5 - 9 | € 228,98 |
| 10+ | € 220,41 |
Documente tehnice
Specificatii
Marca
LegrisTip produs
2 Way
Ball Material
Polished Brass
Tip atasament
Threaded
Filet standard
BSPP
Dimensiune filet
1/2in
Tip material
Nickel Plated Brass
Safe for Use With
Water
Maner
Lever
Presiune maxima de lucru
580psi
Operating Pressure
40bar
Maner
Red
Presiune maxima de lucru
40bar
Tara de origine
France
Detalii produs
In-Line Double Female Vented Lockable Ball Valve
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple 180° turn for the three way version
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.