KEMET Ferrite Flat Cable Ferrite, Solid Core, Inner dims. 23.5 x 1.5mm
Documente tehnice
Specificatii
Marca
KEMETTip produs
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Detalii produs
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,81
Each (Supplied in a Box) (fara TVA)
€ 0,964
Each (Supplied in a Box) (cu TVA)
Impachetare pentru productie (Cutie)
50
€ 0,81
Each (Supplied in a Box) (fara TVA)
€ 0,964
Each (Supplied in a Box) (cu TVA)
Impachetare pentru productie (Cutie)
50
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Cutie |
|---|---|---|
| 50 - 95 | € 0,81 | € 4,05 |
| 100 - 245 | € 0,76 | € 3,80 |
| 250 - 495 | € 0,69 | € 3,45 |
| 500+ | € 0,62 | € 3,10 |
Documente tehnice
Specificatii
Marca
KEMETTip produs
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Detalii produs
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.