HARWIN Spring Test Probe With Serrated Tip
Documente tehnice
Specificatii
Marca
HARWINLungime
16.35mm
Tip material
Phosphor Bronze
Contact Resistance
30mΩ
Probe Tip Type
Serrated
Tara de origine
Taiwan, Province Of China
Detalii produs
RS Pro Spring Probe with Crosscut Head
Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 3,41
Buc. (Intr-un pachet de 5) (fara TVA)
€ 4,058
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 3,41
Buc. (Intr-un pachet de 5) (fara TVA)
€ 4,058
Buc. (Intr-un pachet de 5) (cu TVA)
5
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 5 - 20 | € 3,41 | € 17,05 |
| 25 - 45 | € 3,05 | € 15,25 |
| 50 - 95 | € 2,79 | € 13,95 |
| 100+ | € 2,53 | € 12,65 |
Documente tehnice
Specificatii
Marca
HARWINLungime
16.35mm
Tip material
Phosphor Bronze
Contact Resistance
30mΩ
Probe Tip Type
Serrated
Tara de origine
Taiwan, Province Of China
Detalii produs
RS Pro Spring Probe with Crosscut Head
Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)