Bartec Plunger Limit Switch, NO/NC, IP54, Duroplast Housing, 250V ac Max, 5A Max
Documente tehnice
Specificatii
Marca
BartecActuator Type
Plunger
Normal State Configuration
NO/NC
Protectie IP
IP54
Maximum Current
5A
Housing Material
Duroplast
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Lungime
29.8mm
Frecventa minima de auto-rezonanta
-40°C
Adancime
10mm
Temperatura maxima de lucru
+90°C
Hazardous Area Certification
ATEX
Latime
18mm
Mechanical Life
10000000Cycles
Tara de origine
Germany
Detalii produs
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 188,22
Buc. (fara TVA)
€ 223,98
Buc. (cu TVA)
1
€ 188,22
Buc. (fara TVA)
€ 223,98
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 188,22 |
| 5 - 9 | € 175,63 |
| 10+ | € 166,58 |
Documente tehnice
Specificatii
Marca
BartecActuator Type
Plunger
Normal State Configuration
NO/NC
Protectie IP
IP54
Maximum Current
5A
Housing Material
Duroplast
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Lungime
29.8mm
Frecventa minima de auto-rezonanta
-40°C
Adancime
10mm
Temperatura maxima de lucru
+90°C
Hazardous Area Certification
ATEX
Latime
18mm
Mechanical Life
10000000Cycles
Tara de origine
Germany
Detalii produs
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .