STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench

Nr. stoc RS: 127-8043Producator: STAHLWILLECod de producator: 96584628
brand-logo
Vezi toate produsele din Componente si accesorii chei

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Marca

STAHLWILLE

PRICED TO CLEAR

Yes

Tara de origine

Germany

Detalii produs

Angle Module For Manoskop® 730DR Electromechanical Torque Wrench

Angle module for use with the Manoskop® 730DR electromechanical torque wrench. Simply attach the module and connect to the torque wrench interface and the torque can be used for angle controlled tightening. The measurements are read off and settings made via the torque wrench. When the preset snug point is reached, the torque wrench automatically switches over to angle-controlled measurement in degrees. Depending on the options selected, the torque wrench can either cut out when the preset angle is reached or an alarm is heard.

P.O.A.

STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench

1

Disponibil in multiplu de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench

Informatii despre stoc temporar indisponibile

1

Disponibil in multiplu de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Informatii despre stoc temporar indisponibile

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Marca

STAHLWILLE

PRICED TO CLEAR

Yes

Tara de origine

Germany

Detalii produs

Angle Module For Manoskop® 730DR Electromechanical Torque Wrench

Angle module for use with the Manoskop® 730DR electromechanical torque wrench. Simply attach the module and connect to the torque wrench interface and the torque can be used for angle controlled tightening. The measurements are read off and settings made via the torque wrench. When the preset snug point is reached, the torque wrench automatically switches over to angle-controlled measurement in degrees. Depending on the options selected, the torque wrench can either cut out when the preset angle is reached or an alarm is heard.