Ruland Beam Coupling, 38mm Outside Diameter, 16mm Bore, 57.2mm Length Coupler
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RulandCoupling Types
Beam Coupling
Alezaj
16mm
Outside Diameter
38mm
Lungime
57.2mm
Cuplu
10.73Nm
Misalignment - Angular
3°
Misalignment - Parallel
0.76mm
Misalignment - Axial
0.38mm
Tara de origine
United States
Detalii produs
Aluminium Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.
€ 108,12
€ 108,12 Buc. (fara TVA)
€ 130,83
€ 130,83 Buc. (cu TVA)
1
€ 108,12
€ 108,12 Buc. (fara TVA)
€ 130,83
€ 130,83 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 108,12 |
| 5 - 9 | € 102,82 |
| 10+ | € 99,70 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RulandCoupling Types
Beam Coupling
Alezaj
16mm
Outside Diameter
38mm
Lungime
57.2mm
Cuplu
10.73Nm
Misalignment - Angular
3°
Misalignment - Parallel
0.76mm
Misalignment - Axial
0.38mm
Tara de origine
United States
Detalii produs
Aluminium Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.