Hengstler TICO 772 Counter, 6 Digit LCD, 60kHz, 12 → 30 V dc
Documente tehnice
Specificatii
Marca
HengstlerTensiunea de alimentare
12 → 30 V dc
Count Mode
Minutes, Seconds
Tip afisare
LCD
Functie
Counter
Input Type
Voltage
Tip conexiune
Plug, Screw
Reset Method
Automatic, Manual
Number Of Digits
6
Timp montare
Panel Mount
Output / Interface
Relay
Digit Height
9.3 mm
Backlighting
Yes
Maximum Count Frequency
60kHz
Display Range
0.0001 → 99 9999
Measurement Range
0.0001 → 99 9999
Temperatura minima de lucru
0°C
Serie
TICO 772
Greutate
200g
Temperatura maxima de lucru
+50°C
Tara de origine
Germany
Detalii produs
Multifunctional Counter - tico 772
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.
€ 257,86
€ 257,86 Buc. (fara TVA)
€ 306,85
€ 306,85 Buc. (cu TVA)
1
€ 257,86
€ 257,86 Buc. (fara TVA)
€ 306,85
€ 306,85 Buc. (cu TVA)
1
Informatii despre stoc temporar indisponibile
Incercati din nou mai tarziu
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 257,86 |
| 5 - 9 | € 247,59 |
| 10+ | € 239,85 |
Documente tehnice
Specificatii
Marca
HengstlerTensiunea de alimentare
12 → 30 V dc
Count Mode
Minutes, Seconds
Tip afisare
LCD
Functie
Counter
Input Type
Voltage
Tip conexiune
Plug, Screw
Reset Method
Automatic, Manual
Number Of Digits
6
Timp montare
Panel Mount
Output / Interface
Relay
Digit Height
9.3 mm
Backlighting
Yes
Maximum Count Frequency
60kHz
Display Range
0.0001 → 99 9999
Measurement Range
0.0001 → 99 9999
Temperatura minima de lucru
0°C
Serie
TICO 772
Greutate
200g
Temperatura maxima de lucru
+50°C
Tara de origine
Germany
Detalii produs
Multifunctional Counter - tico 772
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.