TE Connectivity Splice Connector, Red, Insulated, Nickel 26 → 20 AWG
Documente tehnice
Specificatii
Marca
TE ConnectivityDimensiune fir
26 → 20 AWG
Lungime totala
27.94mm
Diametru
2.03mm
Insulation
Insulated
Culoare
Red
Insulation Material
Modified Polyvinylidene
Material de contact
Copper Alloy
Placa contact
Nickel
Tara de origine
Mexico
Detalii produs
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp In-Line Butt Splices
MiniSeal high performance immersion-resistant crimp in-line butt splices consisting of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve made from radiation cross-linked polyvinylidene fluoride. These MiniSeal™ crimp splices are environmentally sealed and maintain the quality of the electrical connection and seal the splice against corrosion, galvanic action over time and exposure to harsh environments. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft and aerospace vehicles, or similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used
For wire sizes and splice configurations please see table.
Splices
€ 489,00
€ 4,89 Buc. (Intr-o cutie de 100) (fara TVA)
€ 581,91
€ 5,819 Buc. (Intr-o cutie de 100) (cu TVA)
100
€ 489,00
€ 4,89 Buc. (Intr-o cutie de 100) (fara TVA)
€ 581,91
€ 5,819 Buc. (Intr-o cutie de 100) (cu TVA)
100
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
Documente tehnice
Specificatii
Marca
TE ConnectivityDimensiune fir
26 → 20 AWG
Lungime totala
27.94mm
Diametru
2.03mm
Insulation
Insulated
Culoare
Red
Insulation Material
Modified Polyvinylidene
Material de contact
Copper Alloy
Placa contact
Nickel
Tara de origine
Mexico
Detalii produs
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp In-Line Butt Splices
MiniSeal high performance immersion-resistant crimp in-line butt splices consisting of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve made from radiation cross-linked polyvinylidene fluoride. These MiniSeal™ crimp splices are environmentally sealed and maintain the quality of the electrical connection and seal the splice against corrosion, galvanic action over time and exposure to harsh environments. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft and aerospace vehicles, or similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used
For wire sizes and splice configurations please see table.