Documente tehnice
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Timp montare
Surface Mount
Tip pachet
PowerSO
Numar pini
20
Maximum Operating Supply Voltage
46 V
Minimum Operating Supply Voltage
4.8 V
Typical Switching Frequency
25kHz
Inaltime
3.3mm
Latime
11.1mm
Temperatura minima de lucru
-25 °C
Dimensiuni
16 x 11.1 x 3.3mm
Temperatura maxima de lucru
+130 °C
Lungime
16mm
Tara de origine
Malaysia
Detalii produs
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
€ 4.302,00
€ 7,17 Buc. (Pe o rola de 600) (fara TVA)
€ 5.119,38
€ 8,532 Buc. (Pe o rola de 600) (cu TVA)
600
€ 4.302,00
€ 7,17 Buc. (Pe o rola de 600) (fara TVA)
€ 5.119,38
€ 8,532 Buc. (Pe o rola de 600) (cu TVA)
600
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
Documente tehnice
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Timp montare
Surface Mount
Tip pachet
PowerSO
Numar pini
20
Maximum Operating Supply Voltage
46 V
Minimum Operating Supply Voltage
4.8 V
Typical Switching Frequency
25kHz
Inaltime
3.3mm
Latime
11.1mm
Temperatura minima de lucru
-25 °C
Dimensiuni
16 x 11.1 x 3.3mm
Temperatura maxima de lucru
+130 °C
Lungime
16mm
Tara de origine
Malaysia
Detalii produs
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.