RS PRO Enclosure Heater, 230V ac, 300W Output, 300W Input, 300mm x 182mm x 133mm
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProOutput Power
300W
Input Power Rating
300W
Tensiunea de alimentare
230V ac
Adancime
133mm
Inaltime
300mm
Latime
182mm
Nominal Current
1.3A
Frequency
60Hz
Tara de origine
United Kingdom
Detalii produs
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.
Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.
€ 122,78
€ 122,78 Buc. (fara TVA)
€ 148,56
€ 148,56 Buc. (cu TVA)
1
€ 122,78
€ 122,78 Buc. (fara TVA)
€ 148,56
€ 148,56 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 122,78 |
| 10 - 24 | € 116,04 |
| 25 - 49 | € 105,49 |
| 50+ | € 101,79 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProOutput Power
300W
Input Power Rating
300W
Tensiunea de alimentare
230V ac
Adancime
133mm
Inaltime
300mm
Latime
182mm
Nominal Current
1.3A
Frequency
60Hz
Tara de origine
United Kingdom
Detalii produs
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.
Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.