TE Connectivity, DuraSeal Butt Splice Connector, Yellow, Insulated, Tin 12 → 10 AWG
Documente tehnice
Specificatii
Marca
TE ConnectivitySplice Type
Butt
Dimensiune fir
12 → 10 AWG
Lungime totala
43mm
Diametru
6.5mm
Insulation
Insulated
Culoare
Yellow
Serie
Duraseal
Material de contact
Copper
Placa contact
Tin
Grosime
3mm
Distrelec Product Id
30401356
Tara de origine
Mexico
Detalii produs
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 38,50
€ 0,77 Buc. (Intr-un pachet de 50) (fara TVA)
€ 45,82
€ 0,916 Buc. (Intr-un pachet de 50) (cu TVA)
50
€ 38,50
€ 0,77 Buc. (Intr-un pachet de 50) (fara TVA)
€ 45,82
€ 0,916 Buc. (Intr-un pachet de 50) (cu TVA)
50
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 50 - 200 | € 0,77 | € 38,50 |
| 250 - 1200 | € 0,71 | € 35,50 |
| 1250 - 2450 | € 0,62 | € 31,00 |
| 2500 - 4950 | € 0,56 | € 28,00 |
| 5000+ | € 0,52 | € 26,00 |
Documente tehnice
Specificatii
Marca
TE ConnectivitySplice Type
Butt
Dimensiune fir
12 → 10 AWG
Lungime totala
43mm
Diametru
6.5mm
Insulation
Insulated
Culoare
Yellow
Serie
Duraseal
Material de contact
Copper
Placa contact
Tin
Grosime
3mm
Distrelec Product Id
30401356
Tara de origine
Mexico
Detalii produs
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed