TE Connectivity Blue Polyolefin Solder Sleeve 18.54mm Length 0.76 → 1.52mm Cable Diameter
Documente tehnice
Specificatii
Marca
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Material
Polyolefin
Tensiune nominala
600 V
Temperatura minima de lucru
-5°C
Temperatura maxima de lucru
+125°C
Culoare
Blue
Serie
D-110
Standarde
ANSI J-STD-004, ANSI J-STD-006
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 1,10
Buc. (Intr-un pachet de 500) (fara TVA)
€ 1,309
Buc. (Intr-un pachet de 500) (cu TVA)
500
€ 1,10
Buc. (Intr-un pachet de 500) (fara TVA)
€ 1,309
Buc. (Intr-un pachet de 500) (cu TVA)
500
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 500 - 7000 | € 1,10 | € 550,00 |
| 7500 - 24500 | € 1,01 | € 505,00 |
| 25000+ | € 0,94 | € 470,00 |
Documente tehnice
Specificatii
Marca
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Material
Polyolefin
Tensiune nominala
600 V
Temperatura minima de lucru
-5°C
Temperatura maxima de lucru
+125°C
Culoare
Blue
Serie
D-110
Standarde
ANSI J-STD-004, ANSI J-STD-006
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.