RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 128 x 72.5mm
Documente tehnice
Specificatii
Marca
RS ProDimensiuni
128 x 72.5mm
Grosime
0.127mm
Lungime
128mm
Latime
72.5mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Temperatura minima de lucru
-45°C
Temperatura maxima de lucru
+125°C
Culoare
Grey
Temperatura de lucru
-45 → +125 °C
Tara de origine
United Kingdom
Detalii produs
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
€ 96,60
€ 9,66 Buc. (Intr-un pachet de 10) (fara TVA)
€ 114,95
€ 11,495 Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 96,60
€ 9,66 Buc. (Intr-un pachet de 10) (fara TVA)
€ 114,95
€ 11,495 Buc. (Intr-un pachet de 10) (cu TVA)
10
Informatii despre stoc temporar indisponibile
Incercati din nou mai tarziu
Documente tehnice
Specificatii
Marca
RS ProDimensiuni
128 x 72.5mm
Grosime
0.127mm
Lungime
128mm
Latime
72.5mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Temperatura minima de lucru
-45°C
Temperatura maxima de lucru
+125°C
Culoare
Grey
Temperatura de lucru
-45 → +125 °C
Tara de origine
United Kingdom
Detalii produs
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.