Documente tehnice
Specificatii
Marca
PR ElectronicsTip modul
Programmable Transmitter
Input Signal Type
Current, RTD, Thermocouple, Voltage
Output Signal Type
Current, Voltage, Relay
Tensiunea de alimentare
19.2 → 300 V dc, 21.6 → 253V ac
Hazardous Area Certification
ATEX
Temperatura de lucru
-20 → +60°C
Serie
5100
Number of Channels
1
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+60°C
Tara de origine
Denmark
Detalii produs
PR Electronics 5116B Ex Programmable Transmitter
PR Electronics 5116B programmable transmitter for linearizing electronic temperature measurement. With a wide variety of configurable inputs for current/voltage or temperature and conversion of linear resistance the 5116 transmitters are suitable for a wide range of temperature measurement applications.
The 5116B transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5116B signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
PR Electronics - Ex Interfaces
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 598,35
Buc. (fara TVA)
€ 712,04
Buc. (cu TVA)
1
€ 598,35
Buc. (fara TVA)
€ 712,04
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
PR ElectronicsTip modul
Programmable Transmitter
Input Signal Type
Current, RTD, Thermocouple, Voltage
Output Signal Type
Current, Voltage, Relay
Tensiunea de alimentare
19.2 → 300 V dc, 21.6 → 253V ac
Hazardous Area Certification
ATEX
Temperatura de lucru
-20 → +60°C
Serie
5100
Number of Channels
1
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+60°C
Tara de origine
Denmark
Detalii produs
PR Electronics 5116B Ex Programmable Transmitter
PR Electronics 5116B programmable transmitter for linearizing electronic temperature measurement. With a wide variety of configurable inputs for current/voltage or temperature and conversion of linear resistance the 5116 transmitters are suitable for a wide range of temperature measurement applications.
The 5116B transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5116B signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.