Documente tehnice
Specificatii
Number of Elements per Chip
2
Transistor Type
NPN + PNP
Transistor Configuration
Isolated
Numar pini
6
Timp montare
Surface Mount
Maximum Emitter Base Voltage
7 V
Temperatura maxima de lucru
+150 °C
Maximum Collector Emitter Voltage
50 V
Maximum DC Collector Current
100 mA
Maximum Power Dissipation
300 mW
Dimensiuni
2.9 x 1.5 x 1.1mm
Marca
PanasonicTip pachet
Mini6 G4 B
Tara de origine
Malaysia
Detalii produs
FI-500 FiberInspector™ Micro
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries and universal power adapter
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
Standard
20
P.O.A.
Standard
20
Documente tehnice
Specificatii
Number of Elements per Chip
2
Transistor Type
NPN + PNP
Transistor Configuration
Isolated
Numar pini
6
Timp montare
Surface Mount
Maximum Emitter Base Voltage
7 V
Temperatura maxima de lucru
+150 °C
Maximum Collector Emitter Voltage
50 V
Maximum DC Collector Current
100 mA
Maximum Power Dissipation
300 mW
Dimensiuni
2.9 x 1.5 x 1.1mm
Marca
PanasonicTip pachet
Mini6 G4 B
Tara de origine
Malaysia
Detalii produs
FI-500 FiberInspector™ Micro
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries and universal power adapter