Documente tehnice
Specificatii
Marca
onsemiStart-up Supply Current
0.25mA
Maximum Source Current
0.01mA
IC Type
Power Factor Controller IC
Maximum Sink Current
500000µA
Maximum Supply Current
30 mA
Zero Power Detection
Yes
Timp montare
Through Hole
Tip pachet
PDIP
Numar pini
8
Dimensiuni
10.16 x 6.6 x 3.44mm
Inaltime
3.44mm
Lungime
10.16mm
Temperatura maxima de lucru
+105 °C
Temperatura minima de lucru
-40 °C
Latime
6.6mm
Detalii produs
Power Factor Controllers (PFC), ON Semiconductor
Power factor controllers with variable CRM, CCM, and DCM that enable power factor correction.
Optocoupler, Intelligent Power Module (IPM) Interface, Avago Technologies
Avago Technologies optocouplers for IPM (Intelligent Power Module) interface exhibit short propagation delay, fast IGBT switching, high common mode transient rejection and wide operating temperature range.
Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.
€ 68,00
€ 1,36 Each (In a Tube of 50) (fara TVA)
€ 80,92
€ 1,618 Each (In a Tube of 50) (cu TVA)
50
€ 68,00
€ 1,36 Each (In a Tube of 50) (fara TVA)
€ 80,92
€ 1,618 Each (In a Tube of 50) (cu TVA)
50
Informatii despre stoc temporar indisponibile
Incercati din nou mai tarziu
Cantitate | Pret unitar | Per Tub |
---|---|---|
50 - 50 | € 1,36 | € 68,00 |
100 - 200 | € 1,27 | € 63,50 |
250+ | € 1,20 | € 60,00 |
Documente tehnice
Specificatii
Marca
onsemiStart-up Supply Current
0.25mA
Maximum Source Current
0.01mA
IC Type
Power Factor Controller IC
Maximum Sink Current
500000µA
Maximum Supply Current
30 mA
Zero Power Detection
Yes
Timp montare
Through Hole
Tip pachet
PDIP
Numar pini
8
Dimensiuni
10.16 x 6.6 x 3.44mm
Inaltime
3.44mm
Lungime
10.16mm
Temperatura maxima de lucru
+105 °C
Temperatura minima de lucru
-40 °C
Latime
6.6mm
Detalii produs
Power Factor Controllers (PFC), ON Semiconductor
Power factor controllers with variable CRM, CCM, and DCM that enable power factor correction.
Optocoupler, Intelligent Power Module (IPM) Interface, Avago Technologies
Avago Technologies optocouplers for IPM (Intelligent Power Module) interface exhibit short propagation delay, fast IGBT switching, high common mode transient rejection and wide operating temperature range.
Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.