Documente tehnice
Specificatii
Marca
MoflashTensiunea de alimentare
12 → 48 V dc
Light Effect
Flashing, Rotating, Steady
Culoare lentila
Amber
Montare
Base Mount
Tip bec
LED
Current Type
DC
Culoare carcasa
Red
Lampa inclusa
Yes
Dimensiune celula
BC 125
Inaltime
90mm
Base Length
125mm
Hazardous Area Certification
ATEX
Temperatura minima
-40°C
Maximum Temperature
+70°C
Base Width
125mm
Tara de origine
France
Detalii produs
Explosion Proof Beacon, BC125 Series
The BC125 beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
This warning beacon has a choice of two types of light source: either Xenon (strobe) with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings. The design of this beacon allows for termination inside the enclosure.
Approvals
Approved by ATEX and CQST, IMETRO and IECEX
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
1
P.O.A.
1
Documente tehnice
Specificatii
Marca
MoflashTensiunea de alimentare
12 → 48 V dc
Light Effect
Flashing, Rotating, Steady
Culoare lentila
Amber
Montare
Base Mount
Tip bec
LED
Current Type
DC
Culoare carcasa
Red
Lampa inclusa
Yes
Dimensiune celula
BC 125
Inaltime
90mm
Base Length
125mm
Hazardous Area Certification
ATEX
Temperatura minima
-40°C
Maximum Temperature
+70°C
Base Width
125mm
Tara de origine
France
Detalii produs
Explosion Proof Beacon, BC125 Series
The BC125 beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
This warning beacon has a choice of two types of light source: either Xenon (strobe) with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings. The design of this beacon allows for termination inside the enclosure.
Approvals
Approved by ATEX and CQST, IMETRO and IECEX
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.