McLennan Servo Supplies Planetary Gearbox, 10:1 Gear Ratio, 12 Nm Maximum Torque
Documente tehnice
Specificatii
Raport de transmisie
10:1
Tip cutie de viteze
Planetary
Cuplu iesire maxim
12 Nm
Diametru ax
12.69mm
Diametru
57 mm
Lungime totala
67.75mm
Tara de origine
Switzerland
Detalii produs
Planetary Gearheads Series 57
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 359,53
Buc. (fara TVA)
€ 427,84
Buc. (cu TVA)
1
€ 359,53
Buc. (fara TVA)
€ 427,84
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 359,53 |
| 5+ | € 336,50 |
Documente tehnice
Specificatii
Raport de transmisie
10:1
Tip cutie de viteze
Planetary
Cuplu iesire maxim
12 Nm
Diametru ax
12.69mm
Diametru
57 mm
Lungime totala
67.75mm
Tara de origine
Switzerland
Detalii produs
Planetary Gearheads Series 57
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: