Legris LF3000 Series Tee Threaded Adaptor, Push In 16 mm to Push In 16 mm, Threaded-to-Tube Connection Style
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
LegrisConnector A
Push In 16 mm
Connector B
Push In 16 mm
Tip de montaj pneumatic
Tee Threaded Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
R 3/8 Male
Producator
LF3000
Thread Material
Brass
Presiune maxima de operare
20 bar
Tip material
Plastic
Frecventa minima de auto-rezonanta
-20°C
Temperatura maxima de lucru
+80°C
Finisare
Nickel Plated
Standarde
EC/42/2006
Tara de origine
France
Detalii produs
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
P.O.A.
Buc. (Intr-un pachet de 5) (fara TVA)
5
P.O.A.
Buc. (Intr-un pachet de 5) (fara TVA)
Informatii despre stoc temporar indisponibile
5
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
LegrisConnector A
Push In 16 mm
Connector B
Push In 16 mm
Tip de montaj pneumatic
Tee Threaded Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
R 3/8 Male
Producator
LF3000
Thread Material
Brass
Presiune maxima de operare
20 bar
Tip material
Plastic
Frecventa minima de auto-rezonanta
-20°C
Temperatura maxima de lucru
+80°C
Finisare
Nickel Plated
Standarde
EC/42/2006
Tara de origine
France
Detalii produs
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.