Documente tehnice
Specificatii
Marca
ITT CannonNumar contacte
12
Montare
Panel Mount
Connector Size
Standard
Priza
Socket
Contact Gender
Female
Terminal
Crimp
Protectie IP
IP67
Serie
Trident Neptune
Body Orientation
Straight
Housing Material
Polymer
Placa contact
Nickel
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+105°C
Material de contact
Copper
Tara de origine
Hungary
Detalii produs
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 22,72
Buc. (fara TVA)
€ 27,04
Buc. (cu TVA)
1
€ 22,72
Buc. (fara TVA)
€ 27,04
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 19 | € 22,72 |
20 - 39 | € 19,82 |
40+ | € 17,77 |
Documente tehnice
Specificatii
Marca
ITT CannonNumar contacte
12
Montare
Panel Mount
Connector Size
Standard
Priza
Socket
Contact Gender
Female
Terminal
Crimp
Protectie IP
IP67
Serie
Trident Neptune
Body Orientation
Straight
Housing Material
Polymer
Placa contact
Nickel
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+105°C
Material de contact
Copper
Tara de origine
Hungary
Detalii produs
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.