Entrelec1SNA115547R1700 SNA Series DIN Rail Terminal Block, 2.5mm², Double-Level, Screw Termination

Nr. stoc RS: 454-788Producator: EntrelecCod de producator: 1SNA115547R1700
brand-logo

Documente tehnice

Specificatii

Culoare

Green

Numar nivele

Double

Serie

SNA

Terminal

Screw

Cable CSA

2.5mm²

Tensiune nominala

380 V ac

Curent nominal

22A

Pitch

6mm

Frecventa minima de auto-rezonanta

-5°C

Temperatura maxima de lucru

+40°C

Detalii produs

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

S-ar putea să te intereseze

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

Informatii indisponibile despre stoc

€ 10,66

Buc. (Intr-un pachet de 5) (fara TVA)

€ 12,685

Buc. (Intr-un pachet de 5) (cu TVA)

Entrelec1SNA115547R1700 SNA Series DIN Rail Terminal Block, 2.5mm², Double-Level, Screw Termination

€ 10,66

Buc. (Intr-un pachet de 5) (fara TVA)

€ 12,685

Buc. (Intr-un pachet de 5) (cu TVA)

Entrelec1SNA115547R1700 SNA Series DIN Rail Terminal Block, 2.5mm², Double-Level, Screw Termination
Informatii indisponibile despre stoc

Cumpara in pachete mari

CantitatePret unitarPer Pachet
5 - 25€ 10,66€ 53,30
30 - 55€ 9,79€ 48,95
60+€ 9,31€ 46,55
S-ar putea să te intereseze

Documente tehnice

Specificatii

Culoare

Green

Numar nivele

Double

Serie

SNA

Terminal

Screw

Cable CSA

2.5mm²

Tensiune nominala

380 V ac

Curent nominal

22A

Pitch

6mm

Frecventa minima de auto-rezonanta

-5°C

Temperatura maxima de lucru

+40°C

Detalii produs

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

S-ar putea să te intereseze