Documente tehnice
Specificatii
Marca
DiodesZetexTip senzor
Hall Effect Sensors
Montare
Through Hole
Magnetic Type
Bipolar, Latch
Maximum Operating Supply Voltage
20 V
Minimum Operating Supply Voltage
3.5 V
Tip pachet
SIP-3
Inaltime
3.2mm
Dimensiuni
4.3 x 1.6 x 3.2mm
Numar pini
3
Temperatura maxima de lucru
+125 °C
Temperatura minima de lucru
-40 °C
Typical Magnetic Sensor Hysteresis
75 Gs
Tara de origine
China
Detalii produs
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,32
Each (Supplied as a Tape) (fara TVA)
€ 0,381
Each (Supplied as a Tape) (cu TVA)
10
€ 0,32
Each (Supplied as a Tape) (fara TVA)
€ 0,381
Each (Supplied as a Tape) (cu TVA)
10
Documente tehnice
Specificatii
Marca
DiodesZetexTip senzor
Hall Effect Sensors
Montare
Through Hole
Magnetic Type
Bipolar, Latch
Maximum Operating Supply Voltage
20 V
Minimum Operating Supply Voltage
3.5 V
Tip pachet
SIP-3
Inaltime
3.2mm
Dimensiuni
4.3 x 1.6 x 3.2mm
Numar pini
3
Temperatura maxima de lucru
+125 °C
Temperatura minima de lucru
-40 °C
Typical Magnetic Sensor Hysteresis
75 Gs
Tara de origine
China
Detalii produs
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.