Documente tehnice
Specificatii
Marca
Allegro MicrosystemsTip senzor
Hall Effect Sensors
Montare
Through Hole
Magnetic Type
Unipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3.8 V
Tip pachet
Ultra Mini SIP
Numar pini
3
Temperatura maxima de lucru
+85 °C
Temperatura minima de lucru
-40 °C
Tara de origine
Philippines
Detalii produs
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Hall Effect Sensors, Allegro MicroSystems
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,96
Buc. (Intr-o punga de 500) (fara TVA)
€ 1,142
Buc. (Intr-o punga de 500) (cu TVA)
500
€ 0,96
Buc. (Intr-o punga de 500) (fara TVA)
€ 1,142
Buc. (Intr-o punga de 500) (cu TVA)
500
Documente tehnice
Specificatii
Marca
Allegro MicrosystemsTip senzor
Hall Effect Sensors
Montare
Through Hole
Magnetic Type
Unipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3.8 V
Tip pachet
Ultra Mini SIP
Numar pini
3
Temperatura maxima de lucru
+85 °C
Temperatura minima de lucru
-40 °C
Tara de origine
Philippines
Detalii produs
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.