Phoenix Contact ATP-ST 6 Series Partition Plate for Use with DIN Rail Terminal Blocks
Documente tehnice
Specificatii
Marca
Phoenix ContactTip accesoriu
Partition Plate
Serie
ATP-ST 6
Utilizare cu
DIN Rail Terminal Blocks
Tara de origine
Germany
Detalii produs
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
€ 2,95
€ 0,59 Buc. (Intr-un pachet de 5) (fara TVA)
€ 3,51
€ 0,702 Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 2,95
€ 0,59 Buc. (Intr-un pachet de 5) (fara TVA)
€ 3,51
€ 0,702 Buc. (Intr-un pachet de 5) (cu TVA)
5
Informatii despre stoc temporar indisponibile
Incercati din nou mai tarziu
Documente tehnice
Specificatii
Marca
Phoenix ContactTip accesoriu
Partition Plate
Serie
ATP-ST 6
Utilizare cu
DIN Rail Terminal Blocks
Tara de origine
Germany
Detalii produs
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².